CSM TUBE can manufacture stainless steel tubing to the technical specifications and sizes required by clients. Our team has years of experience in delivering the right properties for different applications, along with specific diameters or wall thicknesses.
Customers requiring standard stainless steel tubing can specify diameters and wall thicknesses, maximum camber and the inside weld bead, as well as lengths that suit their needs. Lengths can vary from 300mm to 14,000mm, while diameters range from 4-28mm.
Heat-treated steel tubing is also available. In this case, the standard hardness is 160HV5, although this can be changed on request. If customers need to adhere to the ASTM A-249 welded steel pipes specification, we deliver a standard hardness of 90HRB. Coil lengths can be customised as well, while all heat-treated tubing is pressure tested in accordance with EN 10217-7 standards.
Our piping can be ordered in stainless steel, AISI 300/400 series and high nickel content alloys (800 - 825 – 840 and 600 - 601). In all cases, technical specifications are included to ensure 100% traceability.
Download technical specifications sheet
|
TUBES IN BARS External diameter from 4,00 to 10,00 mm ±0,07
Thickness % ± 10
Max Camber from Ø 4,0-10,0 1,00 mm/m
Inside weld bead =<0,10mm from 0,30 to 0,75mm thickness
Length from mm 300 to 3.300 ±1,00 mm
|
HEAT-TREATED TUBE Hardness 160 ± 15 HV5 if not otherwise requested by the customers
For tube in coils Length from 100 to 400 m Pressure test in air at 10 Bar for 10 min. or,in conformity with EN 10217-7 norm, in water at 70 Bar or up to 300 Bar on request
Tolerance on external Ø: |
MARKING All tubes are marked with identification code of producer, in addition to diameter, thickness, alloy and specific production information to guarantee that all data about them are traceable
|
